Catrimown Backyard 6x4 Storage Sheds, Galvanized Steel Outdoor Storage Shed with Air Vent and Lockable Door, Gable Roof Patio Storage Shed & Outdoor Backyard Storage Brown

It says it requires 2 people to set it up which absolutely would make it much easier but it is possible to set it up by yourself. I set mine up by myself in about 6 hours. Make sure you follow the directions and if the holes don't line up you've done something wrong. I made a couple mistakes where the holes weren't lining up and after studying the parts and the instructions, i figured out my mistake and corrected it. The instructions could be a little more detailed because, for example, one of my mistakes was putting the top support rail on backwards. The inductions don't say if the angel should be facing in or facing out. I put it facing out and i should have faced it in. It wasn't hard to fix but it was a lot of screws to remove and replace. Don't expect this shed to be as sturdy as a plastic/ vinyl shed. The panels will dent pretty easily. Also it's not the shed for someone that needs it to be secure, the screws for the latch are easily accessible from the outside. For the price compared to other shed options, I give this shed 5 stars

Let’s start by saying this is not gonna hold up to any hurricane nor a blizzard. So if you are looking for something sturdy and well put together, please get another shed.Here are some ideas.Pro vs ConsPros: instructions are very well done. The price is not bad considering all other prices I checked. It looks aesthetically pleasing. You could assemble it by yourself but it’s better with two person.Cons: If you put it together without taking out the protective film, it could go fast, if you have to take the anti scratch film, it will take lots of extra hours. As a matter of fact, the reason why it lost the star it was because how long and how annoying it was to take that film.This is not a water proof shed, it will leak and it has spaces that you won’t be able to plug cause they are just too big. I mean you could use other materials and get it done, that’s what I did.There are many parts where the screws are very loose and there is nothing you can do. It doesn’t have a floor, so you have to make up one or use your own flooring.Overall this is not a bad shed for gardening tools and other rough items, just don’t buy expecting a water proof very solid shed.

I'm 5'2, not very handy, and built this myself, just to give you an idea of the ease of it. It did take about 6 hours and a second person would have been helpful, but we do what we can!I had plenty of extra hardware at the end and the instructions were very clear.It does dent easily so be careful when taking your pieces out of the box. Once up though, it's much more sturdy.Tips:- use a screw gun and make sure it's fully charged. Mine died while I was putting on the roof pieces so I had to use a screwdriver for the rest- if your holes don't line up, you're either not on level ground or the piece is in the wrong spot. Sometimes I had to shift the whole shed to get the pieces to line up as I wasn't on level ground, other times, I was putting the wrong piece in the wrong spot- don't tighten your screws fully until they're all in- it was below freezing when I built this and I definitely don't recommend that haha, hard to hold the screws when you can't feel your fingers- the bottom part of the roofing doesn't have predrilled holes but it doesn't need it. It's very easy to get through that metal even with just a screwdriver- when putting the roof pieces on, put the ladder inside and move from the front to the back, then put the back panels on from the outsideAgain, if something isn't fitting, you may need to shift things or check and make sure you don't have the wrong piece or need to turn it around etc. I made a few mistakes because I wasn't looking carefully and rereading the instructions fixed it

The overall rating is a 3 for a few factors. The price to size ratio is good. The price to quality is average. The price to instructions is below average. This was also do to parts not aligning. It took roughly 4-5 hours to complete. The parts are VERY SHARP, wear thick gloves. The frame construction was simple but the sides and especially the roof was difficult. We realize the drills holes were not in line. Not a big deal, made our own, sealed the others but frustrating trying to follow. The material is also fragile in the sense that it dents VERY EASILY!!! Don’t put pressure on the sides or roof… I placed my drill roughly on the roof why aligning holes.. dent! I placed my hands on the side while picking some dropped screws, dent!!! You can push some of the dents out but the creases in the metal stays. Lastly, it’s been 3 weeks and we’ve had some rain, it’s already starting to rush on some parts. Most notably the hinges and screws. I put some wd40 on, let’s see..

It took about 4 hours to assemble, and requires at least 2 people to do so.But, if you like building things, it is a great price for the size. We caulked in all the small holes/vents so that no bugs can get in. It fits a surprising amount of tools.It is sturdy but is even sturdier when you put things inside to weigh it down.