Lamicall Gooseneck Phone Holder Bed - [Nylon Braided] Flexible Arm, 38inch Overall Length, 360 Adjustable Clamp Clip, Overhead Cell Phone Mount Stand for Bed, Desk, 4-7” Cellphone

I actually have four of these. Two on each of the beds I spend my days working or having meetings with clients on. Since I'm unable to sit comfortably in a chair or stand for long periods of time, I have used them a lot to attend classes, do the required visits with classmates, watch a movies etc. I have two of them on each bed, one of them is rigged up as a document holder. I have to reposition the gooseneck on the one that holds my phone at 15-20 times every day, they have worked very well for that. The swivel cell phone holder makes it possible to get your phone in whatever position you want. The goosenecks are very stiff, but that's what makes them hold your phone up over your head without any additional assistance. I have made sure not to try to bend them at a 90° angle right where they attach to the clamp, But I have not had to try that because the gooseneck is long enough that on a bed you don't have to do any extreme angle bending of it after you get it all positioned the first time. I think they're great, no problem with breakage, but maybe it depends on what you're trying to get them to do.......

I knew I had a quality product on my hands when I noticed the rubber strip just in front of the clamp's hinge. As far as I can tell, its only purpose is protecting the clamp's spring, preventing anything from getting pinched in there. It has nothing to do with basic functionality, or with advertised features. It just makes the product better.This isn't one of those products where you wish the manufacturer had spent an extra nickel on better components; nor where you take it out of the packaging and realize that it was designed to just barely fulfill the letter of its features but not their spirit. You know that feeling when you get a pair of headphones and the "integrated playback controls" are a single button that recognizes various sequences of short and long presses? Or a camera that advertises 240 FPS but it turns out that it records at 30 FPS and then inserts seven extra copies of each frame?This, by contrast, is a good product. A maximum viable product, if you will, rather than a minimum viable product. I'm very happy with it. Here are some details that you may be wondering about.First, the clamp tension securely holds a phone without crushing it in a death grip. As shown in the photos, a phone can be placed in two positions: near the front of the clamp, and behind the second set of "teeth." This is useful if you have - here's detail two - a phone with a thick battery case. The first position holds a phone of average thickness perfectly, and a very thick phone very passably. If you want more peace of mind, though, you can move the phone a bit rearwards so that its front is held by the first position's rear teeth. Those teeth may cover a tiny portion of the phone's screen (given modern narrow bezels), but that's part of what guarantees their secure hold.Third, the ball joint connecting the clamp to the gooseneck is perfectly serviceable. It's easy to tighten and loosen, easy to adjust when loose, and firm enough when tight. If you have a really heavy phone, though - or if you put one phone off to one side in the first position and another toward the opposite side in the second, like I do, because I sometimes want a miniature dual-monitor setup - it tends to sag even when hand-tight. I can't fault it for this, because 1) that's not a reasonable load, 2) you can just let it sag and then adjust the gooseneck a bit higher to compensate, and 3) increasing the load capacity would need a whole new design, not a simple/obvious fix. Even though it's not a negative, it's a good detail to know about.Fourth, the gooseneck itself: if you're not trying to bend it, it won't bend. If you are trying to bend it, it will bend. Pretty much the perfect level of tension.Fifth, the base clamp: padded jaws that won't mar furniture, and the knob to open and close them is that entire plastic tube that extends out of the base, making it easy and comfortable to adjust.Sixth, the stability of the whole contraption: as good as can be. The gooseneck's rigidity means that very little wobble comes from the product itself. Mounting conditions are more important: mine is on my bed's headboard, which extends upward without extra support - that can wobble before I even attach anything to it. One solution is to mount it at the lowest point of the headboard, but my solution (see photos) is to adjust the gooseneck so that it rests against the wall with just a bit of tension. This cuts down any wobbling to virtually nothing. Note that I have a bit of plastic around the part that contacts the wall, to minimize wear on the wall as well as on the gooseneck's braided nylon.If you use your phone in a desktop stand, pick up your phone (yes, now) and hold it up where you wish it could be instead of on your desk. Those of you now muttering "but I want it on my desk" are all set. The rest of you would probably benefit from this gooseneck holder.

I enjoyed this product so much I had to try this updated version. but I prefer the clip on the previous model of this item. Phone comes unclipped when I am just trying to adjust its position. Maybe I just have to get used to it. But I find myself going back to the old one more often.

I’ve bought this in December of 2024 and I’m still using it to this day so far. Yeah it’s tough to position cause of the material they use, but it’s a sacrifice that you know it’ll stay put. I usually put it on my desk or on my headboard piece, I haven’t had times where it sags down on its own yet. The clamp is very simple to do and it kept its ground from all the intense repositioning. I’m planning on buying another one so I don’t have to unclamp and clamp again.

I bought this after having a Zoom meeting with a colleague who was looking directly at me the entire time, while I was staring up at the green light on my desktop. I asked how he was doing this, and he told me about this handy gadget.Simply clamp it onto your desk and position it so that it is at eye level between you and your desktop. Connect to Zoom via your phone. Now, everyone will be looking directly at you, not at the top of your head. Meanwhile, you can pull up files on your desktop as needed. Brilliant!

Just started using it and no problems yet. I watch movies and videos in bed. Attachment to the head board is quite nice. No problems with bending in any direction so for. The phone clip or clamp is very user friendly and rotates 360 ° quite easily. I am very satisfied with this purchase. I'll update my review in a year or so.

This keeps breaking on me. I’ve had this one now 8 more the wmd it’s flimsy at best. The previous one I had broke and I had to return it to get a replacement. Sadly I’ve had this too long to return it, but I most certainly will NOT be getting a third one. Horrible quality.Update: company reached out to me and sent me a free replacement. They offered a refund or replacement and I chose replacement. Kudos to the company for doing this. Let’s hope the quality has improved.

It seems well made, but i just got it so time will tell. shakes easily if touched, but I have it stretched out as far as it will go, which was not easy as the neck is extremely stiff to move around!!!!! I mean its very stiff and took all my strength (older woman, but not that old) to straighten the neck out from the side table to my chair. The table clamp is a solid hold, but is very limited where it can be placed.